Formation of TiO₂ nanotube layer by self-organizing anodization: The influence of microstructure
S.Yamamoto, H.Tsuchiya, S.Fujimoto (Graduate School of Engineering, Osaka University)

Hydrothermal Synthesis and Bio-Molecules Joining of Tailor-made Ceramic Nanocrystals
S.Ohara, Z.Tan, K.Yamamoto, N.Qiu, T.Hashishin (Osaka University)

Influence of Beam Position on Toughness of F82H/SUS316L Butt-Joint Welded By Fiber Laser
H.Serizawa (Osaka University), D.Mori, H.Ogiwara, H.Mori (Graduate School of Engineering, Osaka University)

Tribological Behavior of Un-bundled Multi-walled Carbon Nanotubes Coated on Pure Titanium Plate and Microstructure Analysis on Their Interface
J.Umeda, K.Kondoh (Osaka University)

Oxide nanotube coating of Ti-Ni alloy by self-organizing anodization
M.S.Kim, S.Yamamoto, H.Tsuchiya, S.Fujimoto (Osaka University)

Microstructure and mechanical properties of friction stir welded high-workability titanium alloys
Y.Morisada, H.Fujii, Y.Sun, R.Ueji (Joining and Welding Research Institute, Osaka University), M.Nakai, M.Niinomi (Institute for Materials Research, Tohoku University)

Highly Osteoconductive Surface of Ti Alloys using Hydrothermal Treatment
A.Waki, Z.Mansjur (Department of Material Science and Engineering, Nagoya University), K.Kuroda, M.Okido (EcoTopia Science Institute, Nagoya University), M.Ueda, M.Ikeda (Faculty of Chemistry, Materials and Bioengineering, Kansai University), M.Niinomi (Institute for Materials Research, Tohoku University)

The Development of Bismuth Based Novel Lead-free Piezoelectric Materials
H.Hojo, K.Oka (Tokyo Institute of Technology), W.Sakamoto (Nagoya University), M.Azuma (Tokyo Institute of Technology)

Growth of large-scale uniform graphene on C-face (000-1) of SiC
H.Ohara (Nagoya University), W.Norimatsu (Department of Applied Chemistry, Nagoya University), M.Kusunoki (EcoTopia Science Institute, Nagoya University)

Thermoelectric properties of Al—(Mn‚X)—Si C54-phase ( X = Ru‚ Ta‚ W‚ and Re )
A.Yamamoto (Nagoya University), T.Takeuchi (Department Crystalline Materials Science, Nagoya University)

Dissimilar laser brazing of sialon and WC-Co alloy using Ag-Cu-Sn-Ti alloy filler metal
K.Nagatsuka (Osaka University), Y.Sechi (Kagoshima prefectural Institute of industrial technology), K.Nakata (Joining and welding research Institute, Osaka University)

Implovement of the thermoelectric properties of a Chimney-Ladder Mn_(1-x)W_xSi_γ (γ~1.75) by means of partial element substitution
N.Hiroishi (Nagoya University), A.Yamamoto, T.Takeuchi (Crystalline Material Science, Nagoya University)

Formation of graphene on SiC in the nitrogen atmosphere and its interface structure
Y.Masuda (Nagoya University), W.Norimatsu (Department of Applied Chemistry, Nagoya University), M.Kusunoki (EcoTopia Science Institute, Nagoya University)

Heusler Fe₂VAl-based thermoelectric thin-films prepared by Radio Frequency sputtering
Y.Furuta (Nagoya University), K.Kato (Toyota Boshoku Corporation), T.Miyawaki, H.Asano, T.Takeuchi (Department of Crystalline Material Science, Nagoya University)

Analysis of the activated species for the reaction of solution plasma in water-alcohol mixture by electron spin resonance
T.Sudare (Nagoya University), T.Ueno, N.Saito (Graduate School of Engineering, Nagoya University)

Development of Fe-Mn-Si-Cr shape memory alloy fiber reinforced Al matrix smart composite
A.Yamamura, H.Sato, Y.Watanabe (Nagoya Institute of Technology)

Formation behavior of wear-induced layer in metallic materials induced by sliding wear
Y.Kaneko, H.Sato, Y.Watanabe (Nagoya Institute of Technology)

Enhanced Piezoresponse in (Bi,Sm)FeO₃ Films at a Morphotropic Phase Boundary
S.Yasui, Y.Ehara, T.Shiraishi, T.Shimizu, H.Funakubo, M.Itoh (Tokyo Institute of Technology), Y.Imai, H.Tajiri (Japan Synchrotron Radiation Research Institute/SPring-8), O.Sakata (Tokyo Institute of Technology), I.Takeuchi (University of Maryland)

Encapsulating Carborane within Well-aligned Carbon Nanotubes on SiC Substrate
H.Fujita (Nagoya University), W.Norimatsu (Department of Applied Chemistry, Nagoya University), M.Kusunoki (EcoTopia Science Institute, Nagoya University)

Low-Temperature Bonding of Cu Bars using Spark Plasma Sintering Process
K.Ito, K.Kohama (Joining and Welding Research Institute, Osaka University)

Improvement of Adhesive Strength between Ti-29Nb-13Ta-4.6Zr Alloy with Anodic Oxide Nanostructures and Segmented Polyurethane Coating
J.Hieda, M.Niinomi, M.Nakai, K.Cho (Institute for Materials Research, Tohoku University), T.Mohri (Graduate School of Engineering, Tohoku University), T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Development of Super- and Sub-Critical Water Annealing Process
K.Sawada (Nagoya University), M.Ogawa, S.Miwa, J.Tsuge, K.Tokutake, S.Imaizumi, H.Kato (Department of Energy Engineering and Science, Nagoya University), N.Isu (Kitchen and Bathroom Technology Research Institute, LIXIL Corporation), S.Deguchi (Department of Energy Engineering and Science, Nagoya University)

Synthesis and Machining of Lead-Free Piezoelectric (K,Na)NbO₃-Based Thin Films
T.Matsuda, W.Sakamoto (Nagoya University), I.Yuitoo, J.Mizuno, T.Takeuchi (Waseda University), T.Iijima (National Institute of Advanced Industrial Science and Technology), M.Moriya, T.Yogo (Nagoya University)

Effect of mechanically induced phase transformation on local stress distribution predicted by a crystal FE analysis
S.Tsutsumi, R.Fincato (Joining and Welding Research Institute, Osaka University), K.Terada, T.Ishida (International Research Institute of Disaster Science, Tohoku University)

Synthesis of novel plastic crystals with cyclic sulfonyl amide anions and their solid-state ionic conductivity
S.Nabeno, T.Watanabe, M.Moriya, W.Sakamoto, T.Yogo (Nagoya University)

Evolution of microstructure driven by sintering stress: Case study of glass films sintered by viscous flow and imaged by X-ray microtomography
F.Wakai (Tokyo Institute of Technology), O.Guillon (Friedrich Schiller University of Jena)

An Aqueous Sodium-Air Cell Using a Nasicon Ceramic Separator
K.Hayashi, K.Shima, F.Sugiyama (Tokyo Institute of Technology)

Temperature programmed desorption behavior of gas species on PdZr amorphous alloy for catalytic application
M.Ozawa, K.Kobayashi, T.Yogo (Nagoya University), S.Yamaura (Tohoku University)

Synthesis of metallic and nonmetallic nanoparticles via aqueous solution process under mild condition
M.Ozawa, K.Kobayashi, K.Kato (Nagoya University), H.Kato (Department of Mater.Sci.Eng., School of Eng., Nagoya University), H.Mizukoshi (Nagoya University)

Optical properties of cerium-zirconium related oxides for environmental-friendly pigment
M.Amimoto, K.Kobayashi (Nagoya University), M.Haneda (Nagoya Institute of Technology), M.Ozawa (Nagoya University)

Effect of estrogen deficiency on osseointegration around surface charged titanium implant
K.Nozaki, N.Ebe, M.Nakamura, N.Horiuchi, K.Yamashita, A.Nagai (Tokyo Medical and Dental University)

In-situ corrosion monitoring of various metallic biomaterials in simulated body fluid
Y.Tsutsumi (Tokyo Medical and Dental University), J.Hieda, Suyalatu (Institute for Materials Research, Tohoku University), P.Chen, M.Ashida (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University), M.Nakai, M.Niinomi (Institute for Materials Research, Tohoku University), T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Structure Controlled Polymeric Microlens Fabrication Using Multiphase Droplet Assembly
T.Sekiguchi (Waseda University), K.Hasegawa, D.H.Yoon, A.Nakahara, S.Shoji (Major in NanoScience and Nanoengineering, Waseda University), T.Arakawa, K.Mitsubayashi (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Synthesis of inorganic-organic hybrid membranes from vinylsilane, triazole, phosphonic acid derivatives
M.Takemoto, M.Moriya, W.Sakamoto (Nagoya University), S.Yamaura (Tohoku University), W.Zhang (Dalian University Technology), T.Yogo (Nagoya University)

Novel Catalytic Reaction Using Nanoporous Cu
S.Kuroyanagi, M.Hattori, W.Sakamoto (Nagoya University), S.Yamamura (Tohoku University), W.Zhang (Dalian University of Technology), T.Yogo (Nagoya University)

Synthesis of perovskite nanoparticle/polymer hybrid fluid
K.Arakawa, M.Moriya, W.Sakamoto, T.Yogo (Nagoya University)

MEMS LC MICROCHIP WITH LOW DISPERSION AND LOW PRESSURE DROP TURN
T.Sekiguchi (Waseda University), K.Takatsuki, A.Nakahara (Major in Nano-Science & Nano-engineering, Waseda University), T.Arakawa, K.Mitsubayashi (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University), S.Shoji, D.Yoon (Major in Nano-Science & Nano-engineering, Waseda University), M.Isokawa, T.Funatsu, M.Tsunoda (Graduate School of Pharmaceutical Sciences, University of Tokyo)

Ni- and Be-free Zr-based bulk metallic glasses for application as biomedical materials
G.Xie (Tohoku University), S.Zhu, F.Qin, M.Niinomi (Institute for Materials Research, Tohoku University), N.Matsushita (Research Laboratory of Engineering Materials, Tokyo Institute of Technology), T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University), M.Tsukamoto (Joining and Welding Research Institute, Osaka University)

Nano-porous tunnel formation and nanocrystal precipitation of Cu-based metallic glass induced by helium ion irradiation
G.Xie (Tohoku University), L.Shao (Department of Nuclear Engineering, Texas A&M University, Texas 77843, USA)

Nano-Porous Au-Ag Joint Layer for Low-Temperature Au-Au Bonding
J.Mizuno (Waseda University), H.Mimatsu, T.Kasahara (Major in Nano-Science and Nano-engineering, Waseda University), M.Saito (Institute for NanoScience and Nanotechnology, Waseda University), H.Nishikawa (Joining and Welding Research Institute, Osaka University), S.Shoji (Major in Nano-Science and Nano-engineering, Waseda University)

Development of new Fe-based metallic glasses for production of glass-coated bipolar plates
W.Zhang (Dalian University of Technology), S.Yamaura (Institute for Materials Research, Tohoku University), X.Wang, X.Jia (School of Materials Science and Engineering, Dalian University of Technology), F.Qin (Institute for Materials Research, Tohoku University), Y.Li (School of Materials Science and Engineering, Dalian University of Technology), K.Abe (Institute for Materials Research, Tohoku University)

FeCo-alloy micro device for vibration energy harvesting
T.Sasaki (Tohoku University), T.Sekiguchi (Nanotechnology Research Center, Waseda University), T.Nakajima, S.Yamaura (Institute for Materials Research, Tohoku University)

Bioactive Surface Modification on TNTZ by Hydrothermal-Electrochemical Technique
E.Takematsu (Tokyo Institute of Technology), J.Hieda, M.Niinomi (Tohoku University), F.Chimoto, K.Katsumata, T.Ikoma, J.Tanaka, K.Okada, N.Matsushita (Tokyo Institute of Technology)

Analyzing Hydrogen Charging of Sputtered Ni-Nb-Zr Films Using Electrochemical Methods
M.Saito (Institute for NanoScience & Nanotechnology, Waseda University), R.Y.Umetsu, T.Sasaki (Institute for Materials Research, Tohoku University), T.Sekiguchi, J.Mizuno, H.Kawarada (Institute for NanoScience & Nanotechnology, Waseda University)

Effect of Heavy Metal Addition on Cu and Au Electrodeposition
M.Saito (Institute for NanoScience & Nanotechnology, Waseda University), T.Homma (Department of Applied Chemistry, Waseda University)

Effects of Alloying Elements on Corrosion Resistance of Zr in a Simulated Body Fluid
S.Nakano (Shibaura Institute of Technology), Y.Tsutsumi, P.Chen, M.Ashida, H.Doi (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University), Suyalatu (Institute for Materials Research, Tohoku University), M.Shimojo, K.Noda (Department of Materials Science and Engineering, Shibaura Institute of Technology), T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Depth Profile Analysis of Hydrogen in Ni-Nb-Zr Amorphous Ribbon by Glow Discharge Optical Emission Spectrometry
R.Y.Umetsu (Tohoku University), M.Saito (Institute for NanoScience & Nanotechnology, Waseda University), T.Sasaki (Institute for Materials Research, Tohoku University), T.Sekiguchi, J.Mizuno, H.Kawarada (Institute for NanoScience & Nanotechnology, Waseda University)

Study on Vacuum Ultraviolet Irradiated Carbon Film for Electrodes in Supercapacitors
J.Mizuno (Waseda University), T.Funabashi (School of Advanced Science and Engineering, Waseda University), M.Sato (Durarth Company), M.Kitajima (Waseda Research Institute for Science and Engineering), M.Matsuura (Institute for Materials Research, Tohoku University), S.Shoji (School of Advanced Science and Engineering, Waseda University)

Comparison of fatigue properties between laser-welded and friction-stir-welded Ti-4.5Al-2.5Cr-1.2Fe-0.1C alloy joints for aerospace applications
M.Nakai, M.Niinomi, J.Hieda, K.Cho (Tohoku University), H.Fujii, Y.Morisada (Osaka University), Y.Ito, T.Konno, Y.Itsumi, H.Oyama (Kobe Steel Ltd.), W.Abe (Kawasaki Heavy Industries Ltd.)

Fabrication of Mg-based bulk amorphous alloys as biomedical materials by spark plasma sintering
F.Qin (Tohoku University), Z.Dan, G.Xie, S.Zhu, I.Seki, M.Niinomi (Institute for Materials Research, Tohoku University)

Water Splitting Activity of Ru, Rh Doped Nb₃O₈ Nano-sheets
K.Kojima, K.Katsumata, N.Matsushita, K.Okada (Tokyo Institute of Technology)

Surface Modification of Ti-9Mn-3Sn Alloy for Anti-metallic Allergy and High Osteoconductivity
Y.Nishide (Nagoya University), K.Kuroda, M.Okido (EcoTopia Science Institute, Nagoya University)

Ultrasonic Fatigue Behavior of Fe-based Magnetostrictive Alloys
S.Yamaura (Tohoku University), T.Nakajima, K.Abe (Institute for Materials Research, Tohoku University)

Characterization of micro cone-shaped solid oxide fuel cells with anode current collector
K.Yasue, M.Furuhashi, S.Kanehira, K.Kikuta (Nagoya University)

Fabrication of new micro SOFC using stereolithography
S.Kanehira (Nagoya University), S.Kirihara (Joining and Welding Research Institute, Osaka University), K.Kikuta (EcoTopia Science Institute, Nagoya University)

Photocatalytic Activity of Titania nanotubes
E.Tamaru, K.Katsumata, N.Matsushita, K.Okada (Tokyo Institute of Technology)

Magnetic properties and phase state of layered compound of (Mn,TM)XGe (TM = Fe and Cr, X = Al and Ga)
R.Y.Umetsu (Tohoku University), Y.Mitsui (Institute for Materials Research, Tohoku University), I.Yuito, T.Takeuchi, H.Kawarada (Institute for NanoScience & Nanotechnology, Waseda University)

Development of Alkali Niobate Tantalate Based Lead Free Piezoelectrics
K.Kikuta (Nagoya University), J.Isono, K.Kura, Y.Morita (Brother Industries Ltd.)

Effect of annealing on structure and magnetic properties of FeCo alloy thin films
T.Nakajima, K.Abe, T.Sasaki (Tohoku University), T.Sekiguchi, T.Takeuchi, I.Yuito, K.Kato (Waseda University), S.Yamaura (Tohoku University), H.Kawarada (Waseda University)

Heat Capacity Study of Composition Dependence on Glass Transition Properties of Ni-Nb-Zr Metallic Glasses
A.Uchida, K.Tateishi, H.Kawaji (Tokyo Institute of Technology), M.Fukuhara (Res. Inst. for Electromagnetic Mater.)

Contact resistivity evaluation of carbon nanotubes by SiC decomposition method
M.Inaba, K.Suzuki, M.Shibuya (Waseda University), Y.Masuda (Nagoya University), A.Hiraiwa (Waseda University), M.Kusunoki (Nagoya University), H.Kawarada (Waseda University)

Build-up route to synthesize nanocomposites for enlarging TPB in SOFC anode electrodes
H.Abe, X.Xi, A.Kondo, M.Naito (Osaka University)

Electrolytic Deposition of Hydroxyapatite on Nanotubular Ti-29Nb-13Ta-4.6Zr Oxide Layer
F.Chimoto (Tokyo Institute of Technology), C.Chen (Faculty of Science and Engineering, Waseda University), K.Katsumata (Materials and Structures Laboratory, Tokyo Institute of Technology), J.Hieda, M.Nakai, M.Niinomi (Institute for Materials Research, Tohoku University), K.Okada, N.Matsushita (Materials and Structures Laboratory, Tokyo Institute of Technology)

Exploration of Strongly Spin-Orbit-Coupled Electron Systems
T.Sasagawa, M.Kanou (Tokyo Institute of Technology), Y.Chen (Oxford University), Z.Shen (Stanford University)

Quenching of diapletic silica glass by multiple compression waves
T.Atou (Tokyo Institute of Technology), T.Nakagawa, M.Shimizu (Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology)

Hardest p-type transparent conducting films using highly boron-doped nanodiamond
M.Koga, T.Kageura, K.Ishak, Y.Shintani (Institute of Nano Science and Technology (INST), Waseda University), M.Hasegawa (Nanotube Research Center, National Institute of Advanced Industrial and Technology), T.Sasagawa (Materials and Structures Laboratory,Tokyo Institute of Technology), A.Hiraiwa, H.Kawarada (Institute of Nano Science and Technology (INST), Waseda University)

Improving the Biocompatibility of TiO₂ Film Formed and Modified with Aerosol Beam and Femtosecond Laser
T.Shinonaga (Osaka University), M.Tsukamoto (Joining and Welding Research Institute, Osaka University), Y.Ito, K.Miyagawa (Graduate School of Engineering, Osaka University), P.Chen, A.Nagai, T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Improving biocompatibility of titanium by periodic nanostructure formation with femtosecond laser
Y.Ito (Osaka University), M.Tukamoto (Joining and Welding Research Institute, Osaka University), T.Shinonaga, K.Miyagawa (Graduate School of Engineering, Osaka University), P.Chen, A.Nagai, T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Plasma Processing of Functional Oxide Material for Creations of Rare Metal-Free Catalyst
K.Takenaka (Osaka University), T.Ueno, N.Saito (Nagoya University), Y.Setsuhara (Osaka University)

Low-Temperature and Low-Damage Plasma Processing of Inorganic/Organic Hybrid Structure for Fabrication of Electronics on Polymers
K.Takenaka, Y.Setsuhara (Osaka University)

Magnetic properties of magnetoelectric Fe/VDF-TrFE copolymer heterostructures
M.Tokunaga (Tokyo Institute of Technology), H.Kojima, Y.Shirahata, E.Wada, R.Shiina, S.Yasui (Materials and Structures Laboratory, Tokyo Institute of Technology), T.Nakajima (Institute for Materials Research, Tohoku University), M.Itoh, T.Taniyama (Materials and Structures Laboratory, Tokyo Institute of Technology)

Bioactive-nanostructure Farbicated on Zr-based BMG Surface using Femtosecond Laser Irradiation and Hydrothermal-Electrochemical Treatment
N.Matsushita (Tokyo Institute of Technology), K-I.Katsumata (Materials and Structures Laboratory, Tokyo Institute of Technology), M.Tsukamoto, T.Shinonaga (Joining and Welding Research Institute, Osaka University), S.L.Zhu, G.Q.Xie, M.Niinomi (Institute for Materials Research, Tohoku University), K.Okada (Materials and Structures Laboratory, Tokyo Institute of Technology)

Effect of containing calcium and silver on paramagnetic susceptibility in Mg-Zn based amorphous alloys
I.Seki (Tohoku University), A.Yamamoto (EcoTopia Science Institute, Nagoya University), F.Qin, R.Y.Umetsu (Institute for Materials Research, Tohoku University), T.Takeuchi (EcoTopia Science Institute, Nagoya University), G.Q.Xie, X.Wang (Institute for Materials Research, Tohoku University), T.Hanawa (Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University)

Development of Photocatalytic Self-cleaning Glass with Nanosheets
K.Katsumata, K.Kojima, N.Matsushita (Tokyo Institute of Technology), A.Fujishima (Tokyo University of Science), K.Okada (Tokyo Institute of Technology)

TLP bonding process using high-temperature LSCM
H.Terasaki, Y.Komizo (Osaka University)

Synthesis and diffusion of MnBi in high magnetic fields
Y.Mitsui (Tohoku University), R.Y.Umetsu (Institute for Materials Research, Tohoku University), M.Saitoh (Institute for NanoScience & Nanotechnology, Waseda University), K.Koyama (Graduate School of Science and Engineering, Kagoshima University), H.Kawarada (Institute for NanoScience & Nanotechnology, Waseda University)

Microstructural Change of Al-Al₃Ti Composite Deformed by Friction Stir Processing
Y.Miyamoto (Nagoya Institute of Technology), H.Sato, Y.Watanabe (Graduate School of Engineering, Nagoya Institute of Technology), Y.Naito, T.Nose (Steel Research Laboratories, Nippon Steel & Sumitomo Metal Corporation)

Electrochemical Monitoring of Nucleic Acid Amplification
E.Yamada (Tokyo Medical and Dental University), K.Nogami, M.Tabata, M.Sanjoh, Y.Maeda, T.Goda, A.Matsumoto, Y.Miyahara (Institute of Biomaterials & Bioengineering, Tokyo Medical and Dental University)

Short Channel Characteristics of a-IGZO Thin Film Transistors Using Very Thin Gate Insulator
H.Fukai (Tokyo Institute of Technology), T.Sasaki (Institute for Materials Research, Tohoku University), H.Kawarada (Department of Electronic and Photonic Systems, Waseda University), K.Nomura (Frontier Research Center, Tokyo Institute of Technology), T.Kamiya, H.Hosono (Materials and Structures Laboratory, Tokyo Institute of Technology)

Processing and catalytic properties of ceria-zirconia composite catalyst for automotive exhaust treatment
T.Fuwa, K.Kobayashi, N.Kamiuchi (Nagoya University), M.Haneda (Nagoya Institute of Technology), M.Ozawa (Nagoya University)

Synthesis and catalytic performance of Pd/CeO₂ Nanoparticles composite
K.Kato, K.Kobayashi (Nagoya University), M.Haneda (Nagoya Institute of Technology), M.Ozawa (Nagoya University)

Synthesis and fundamental performance of Pt catalyst supported on CeO₂ and ZrO₂ nanoparticles
S.Takahashi, K.Kobayashi (Nagoya University), M.Haneda (Nagoya Institute of Technology), M.Ozawa (Nagoya University)

Fabrication of Pt/CeO₂ catalyst using ceramic honeycomb substrate
M.Takahashi, K.Kobayashi (Nagoya University), M.Haneda (Nagoya Institute of Technology), M.Ozawa (Nagoya University)

Soft contact-lens type biomedical sensor for in situ ocular biomonitoring of tear glucose concentration
T.Arakawa, M.X.Chu, M.Munkhjargal, K.Miyajima, K.Mitsubayashi (Tokyo Medical and Dental University)

Photocatalytic Conversion of CO₂ over Co-catalyst Doped LDHs
K.Ikeda, K.Katsumata, N.Matsushita, K.Okada (Materials and Structures Laboratory, Tokyo Institute of Technology)

Plasma MIG brazing process of dissimilar metal
S.Tashiro, M.Tanaka (Joining and Welding Research Institute, Osaka University)

AC Iontophoresis of Lidocaine with Alginic-Acid Gel Electrodes
T.Ebisawa, K.Matsumoto, A.Nakajima, H.Haida, S.Ando (Tokyo Medical and Dental University), T.Yoshioka, T.Ikoma, J.Tanaka (Tokyo Institute of Technology), H.Fukayama (Tokyo Medical and Dental University)

Effects of Gaps between Faying Surfaces on Process of Anodic Bonding
M.Takahashi (Osaka University)